As an important equipment for metal processing, the operation safety of steel plate mesh machine is directly related to production efficiency and personnel safety. Standardized operation procedures can not only avoid work-related accidents, but also extend the service life of equipment. The following are key safety operation points:
- Preparation before operation
Equipment inspection
Confirm that the power line is not damaged and the grounding is reliable.
Check whether the stamping die is firmly installed without cracks or wear.
Personal protection
Wear anti-cut gloves, goggles, and safety shoes to avoid metal splash injuries.
Long hair needs to be tied up, and clothes should not be loose to prevent them from being drawn into the machine.
- Precautions during operation
Standardized operation
It is strictly forbidden to put your hands or tools into the mold area, and special clamps must be used for feeding.
Only one sheet is allowed to be placed in a single processing to avoid stacking and causing machine jams.
Abnormal handling
When abnormal noises, smoke, etc. occur, press the emergency stop button immediately.
In case of jamming failure, the power must be turned off first, and then professional tools must be used to clean it.
- Shutdown and maintenance
Proper shutdown
After production, turn off the power and release the residual pressure of the equipment.
Regular maintenance
Lubricate the guide rails and bearings every week, and check the oil level of the hydraulic system every month.
